| Manual Content & Operating Procedures Section 1: Setup & Pre-Operative Check -
Inspection: Ensure the machine is free of debris and that the cutting rollers rotate smoothly without resistance.
-
Carrier Selection: Choose the appropriate graft carrier (e.g., 1.5:1, 3:1) based on the required expansion ratio.
-
Lubrication: Apply a drop of surgical-grade lubricant to the drive gears if necessary to ensure silent and smooth operation.
Section 2: Operating Instructions -
Graft Placement: Place the donor skin graft (dermal side down) onto the carrier. Ensure the graft is flat and free of folds.
-
Feeding the Machine: Insert the leading edge of the carrier into the entry slot of the mesher.
-
Manual Rotation: Turn the hand crank in a steady, clockwise motion. Do not force the carrier; let the rollers draw it through at a natural pace.
-
Retrieval: Carefully remove the meshed graft from the carrier using fine-tipped forceps for immediate application to the wound site.
Section 3: Sterilization & Cleaning (The "Gold Standard") -
Pre-Cleaning: Immediately after use, rinse the mesher with cool water to prevent blood and proteins from drying on the rollers.
-
Disassembly: If the model allows, remove the handle and rollers for deep cleaning. Use a soft-bristled brush to clean between the cutting teeth.
-
Autoclave Settings: * Temperature: 134°C (273°F).
-
Duration: 3 to 5 minutes (Pre-vacuum cycle) or 15 minutes (Gravity displacement).
-
Drying: Ensure the machine is completely dry before storage to prevent oxidation, even on high-grade stainless steel.
- Suggested Content Layout (H2/H3)
-
H1: Skin Graft Mesher Instruction Manual – Delta Med Surgical
-
H2: Comprehensive Guide to Surgical Skin Expansion
-
H3: Step-by-Step Cleaning and Sterilization Protocols
-
H2: Maintenance Tips for Long-Term Precision Cutting
Derma Carrier Plates Sterile Packed. -
Skin Graft Mesher Machine 1 Pcs
Dermacarrier II 3:1, Sterile 10 Pcs
Dermacarrier II 1.5:1, Sterile 10 Pcs
Dermacarrier II 6:1, Sterile 10 Pcs
|
